a人片在线观看-a人片在线观看苍苍影院-a三级黄色-a色片-a视频免费看-a天堂v

The LAG RWC robot welding unit is a flexible production method, whether it is a large order, or a multi-frequency small batch order, you can quickly complete the task.

Advantages:

Welding manipulator: The manipulator can move with high precision along the linear guide rail through the cantilever servo guide rail or walking ground rail, and under the action of the pinion and rack transmission structure driven by the high-precision servo motor, the manipulator can reach the welding station. The 7-axis manipulator is combined with the positioner to form a linkage, which can be in contact with the surface of the welding workpiece to a large extent to complete the welding work.

Positioner: The positioner is usually composed of a frame, a servo turning mechanism, a servo positioner and an electrical control part. The servo turning mechanism is driven by the servo motor, which can make the two stations rotate 180 degrees in parallel for station exchange. It can be manually or mechanically operated in a fixed position. The servo displacement mechanism is driven by the servo motor and the reducer, which can make the workpiece turn over in the vertical direction and any position in the circumference

Detailed parameter

Welding machine

LAG provides accurate welding process solutions according to your product welding requirements

CCD visual calibration system

The laser scanner equipped with the welding machine will scan two locations on the welding structure to determine the welding path, and the signal from the scanner will correct the welding path of the torch. The control system receives the identification signal and, according to the size, guides the robot to track the scanning path through the laser scanner installed on the machine hand, so that the welding gun can complete the welding task.

CAM software

Through the customized computer-aided welding CAM ACT/WELD software can directly import the 3D model of the workpiece, the system directly generates the robot welding path, combined with the CCD visual calibration system, to achieve multi-variety, small batch customer needs.

Dust removal system

The standard high negative pressure dust removal device is used to capture the sub-micron welding dust and particles produced in the welding process to meet the indoor emission standards.

Welding solutions

With many years of experience in sheet metal dropping and bending, we also provide our customers with automated fixture systems and welding solutions.